Article Text

Download PDFPDF
Interventional cardiology
Stent expansion: a combination of delivery balloon underexpansion and acute stent recoil reduces predicted stent diameter irrespective of reference vessel size
  1. Shahid Aziz1,
  2. John L Morris2,
  3. Raphael A Perry2,
  4. Rodney H Stables2
  1. 1
    Department of Cardiology, Royal Blackburn Hospital, Blackburn, UK
  2. 2
    Department of Cardiology, The Cardiothoracic Centre, Liverpool, UK
  1. Dr Shahid Aziz, Royal Blackburn Hospital, Haslingden Road, Blackburn, Lancashire BB2 3HH, UK; saziz1{at}btinternet.com

Abstract

Background: There is a strong inverse relationship between final vessel diameter and subsequent risk of treatment failure after coronary stent deployment. The aim of this study was to investigate the magnitude by which stent delivery balloon underexpansion and stent elastic recoil contributed to suboptimal final vessel geometry.

Methods: A prospective angiographic study recruiting 499 lesions (385 patients) undergoing coronary stent implantation was performed. Quantitative coronary angiography (QCA) was used to measure the minimal lumen diameters of the delivery balloon during stent deployment (MLD1) and of the stented segment following balloon deflation (MLD2). The expected balloon diameter for the deployment pressure was determined from the manufacturer’s reference chart. Delivery balloon deficit was measured by subtracting the MLD1 from the expected balloon size and stent recoil was calculated by subtracting MLD2 from MLD1. Delivery balloon deficit and stent recoil were examined as a function of reference vessel diameter (RVD) and balloon–vessel (BV) ratio.

Results: The final stent MLD was a mean 27.2% (SD = 7.2) less than the predicted diameter. The mean delivery balloon deficit was 0.65 mm (SD = 0.27) and the mean stent recoil was 0.28 mm (SD = 0.17). Percentage delivery balloon deficit and stent recoil were independent of RVD. Delivery balloon deficit increased with higher BV ratios. Stent recoil was independent of BV ratio and the use of predilatation.

Conclusion: Failure to achieve predicted final stent diameter is a real problem with contribution from delivery balloon underexpansion and stent recoil. On average the final stent MLD is only 73% of the expected diameter, irrespective of vessel size.

Statistics from Altmetric.com

Request Permissions

If you wish to reuse any or all of this article please use the link below which will take you to the Copyright Clearance Center’s RightsLink service. You will be able to get a quick price and instant permission to reuse the content in many different ways.

Footnotes

  • Competing interests: None.

  • Abbreviations:
    BV
    balloon–vessel ratio
    CSA
    cross-sectional area
    MD
    minimal diameter
    MLD
    minimal lumen diameter
    QCA
    quantitative coronary angiography
    RVD
    reference vessel diameter

Linked Articles